MK19 TM 230 23 P Aug 2012 059686 - 88410 Words

ARMY *TM 9-1010-230-23P AIR FORCE TO 11W2-5-16-2 MARINE CORPS TM 08521B/09761A-OI NAVY SW 363-C3-MMM-020 TECHNICAL MANUAL FIELD MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR MACHINE GUN, 40 MM, MK19 MOD 3, NSN 1010-01-126-9063 (EIC 4AE) MACHINE GUN, 40 MM, MK19 MOD 3, WITH SIGHT BRACKET NSN 1010-01-490-9697 MACHINE GUN, 40 MM, MK19, UPGUNNED WEAPONS STATION (UGWS) NSN 1010-01-362-6513 *SUPERSEDURE NOTICE - This Technical Manual supersedes TM 9-1010-230-23P dated 30 November 2005, inlcuding all changes. DISCLOSURE NOTICE - This information is furnished upon the condition that it will not be released to another nation without the specific authority of the Department of the Army of the United States, that it will†¦show more content†¦Hand injury or equipment damage may result. †¢ Be sure to put bolt in forward position before removing the backplate pin assembly. Failure to observe this warning will result in injury. †¢ In case of a runaway gun, never try to break the ammo belt with your hands. Injury could result. Lower one charging handle to prevent the gun from firing. †¢ To avoid injury, keep fingers clear of the cocking lever when firing pin fires. †¢ Ensure safety slide block is installed in the position shown. If safety slide block is improperly installed, the thumb safety will not function, endangering personnel. WARNING FLYING PARTICLES †¢ The shuttle spring and spring housing are held under pressure. Always use the feed slide tool to secure the spring before removing the screws. Failure to observe this warning will result in injury. †¢ Do not attempt to remove three self-locking shoulder screws from the feed slide housing. Springs will fly out causing injury. †¢ The firing pin is under heavy spring tension. Always shield the tip of the firing pin whenever it is exposed and cocked. This will prevent injury if the firing pin sear is accidentally depressed. †¢ Helical spring is under tension. Shield helical spring while pulling out pawl rod. This will prevent injury. b 03/15/2011 Rel(1.8) root(warnsum) wpno(F00103) TM 9-1010-230-23P WARNING SUMMARY - Continued GENERAL SAFETY WARNINGS DESCRIPTION - Continued WARNING FALLING PARTS Ensure stow pin and